How To Fix Message Blocking Is Active.
When trying to send an urgent text, you may have received the message “free msg: unable to send message blocking is active.”
The problem has been noticed by many users, and it can be annoying, especially when we need to send an urgent message.
Because text messaging remains the most convenient and widely used mode of communication in our daily lives, as a result, any problems with getting information over in a timely manner might be devastating.
In this post, we’ll look at what “message blocking is active” actually implies, as well as why that message appears.
We’ll also offer some basic solutions to the problem.
Table of Contents
What does message blocking is active mean?
What Does “Active Message Blocking” actually mean?
Well, either on Android and iPhones, the “message blocking is active” error indicates that you have blocked the other person.
When message blocking is enabled, any message you send will not be received
by the intended recipient.
On your screen, you may simply see the phrase “free msg: unable to send
message blocking is active.”
Recommended =>> Fix No Supported App For This NFC Tag Android | Samsung No Supported App For This NFC Tag
This can happen for a variety of reasons, but the most common one is that the receiver either has you on their block list or you have them on yours.
T-Mobile customers, on the other hand, appear to be plagued by this issue on a regular basis.
In the following section, we’ll delve deeper into the reasons.
Why is message blocking active?
The following is a list of possible causes for the “message blocking is active” notification to appear.
Shortcode issues
Another possibility, according to T-Mobile, is if the shortcode is incorrect.
Shortcodes that were either inactive or wrong caused several “message blocking is active” errors.
If you’re in the clear, the error is on T-end, Mobile’s and you’ll need to contact them so that their specialists can rectify the problem.
Service outage
Again, this is not your fault.
The error message “free msg: unable to send message — message blocking is active.” could indicate a service outage.
Because of a lapse on the part of your service provider, the message blocking notification message may be activated.
So, before retrying, wait a few minutes or hours.
It’s possible that your network provider is performing maintenance and has suspended the messaging service.
You could also try calling your customer support department to see whether your messaging services were put on hold inadvertently.
Text message app restrictions
The error “free msg: recipient unable to receive the message – message blocking is active.” indicates that the receiver has messages from a certain group of people blocked/restricted.
Some messaging apps may have difficulties integrating with your carrier.
Whether any of these were deployed, you may need to find out if you can authorize these programs manually.
You might not be able to tackle this problem on your own if there isn’t an option to allow certain programs.
Data plan issues
This occurs when your subscription plan does not cover texting services.
To find out if you’ve picked the proper package, contact customer service.
If you’re using a Data Only plan to send text messages, there’s a possibility that the message won’t get through and you’ll see this error message.
Even if messaging services are included in your current plan, your prepaid account may not have enough balance to send a message.
Premium message support Issues
You should also make sure the provider to which you’re sending the message supports premium text messaging.
We earlier talked about not being able to send the message because your carrier doesn’t support a premium text messaging service, in this case, you should be sure that the issue isn’t on the recipient’s end.
Blocklist
Active notification popping up is one of the most typical causes of message blocking.
It occurs when one or both of the sender and receiver are on each other’s blocked contacts lists.
You could try to confirm this by calling each other and seeing if the call is successful.
In some circumstances, parental controls may be enabled inadvertently.
How To Fix The Error Notification ‘Message Blocking is Active” on Android and iPhones
There are many possible ways to fix the message blocking error. To do so, you should try any of these other techniques.
Let us know which of these options worked best for you in the comments.
1.Ensure you have coverage.
Check your network’s coverage to see if it’s adequate.
You may be unable to call someone or send and receive text messages if the coverage is reported as None or you are unable to detect bars.
2.Ensure your phone is turned on/active.
Check and ensure that your phone is active on your account’s device settings page; if it’s displayed as Suspended or Still Porting, you won’t be able to send or receive text messages.
3. Is text messaging included in your strategic plan?
This has already been mentioned.
Check to see if the Can Send/Receive Text Messages feature is enabled on your account device settings page.
If you haven’t already, enable this option.
If you are unable to enable the option, it is likely that you do not have text messaging included in your plan or that your phone number is inactive.
4.Ensure you are using the correct country code?
If the issue occurred in a foreign text, a quick Google search of the country code will reveal whether you are using the correct one.
5. Try Restarting the process.
If the error “free msg: receiver unable to receive message – message blocking is active.” occurs on only one phone, the number may be problematic.
It’s possible that it’s inaccurate.
Retry by deleting and resaving the number.
6. Remove the SIM cards and swap them.
Change the SIM cards in your Samsung phone and try messaging with a different SIM card.
If it works, the problem is most likely with the SIM.
Check if your inability to send text messages is SIM-specific.
7. Unblock
If you’re still getting the “unable to send message — message blocking is active” problem, you can try asking the person who blocked you to unblock you.
Call the number if you’re not sure if you’ve been blocked or not.
If it doesn’t connect, it’s possible that you’ve been blocked or that the individual has blocked you.
If your calls are answered, you may have to attempt again.
If calls are successful, you may need to attempt the other solutions in this post.
8. Text Content
Some users were able to get around this by only sending a plain text in their communications.
There’s a probability that all of the other non-plain-texts in the message contributed to this problem.
Retry after removing all attachments, emojis, photographs, or graphics from the message.
Is your problem an active message blocking issue on Android, or a “message blocking is active” error on iOS (iPhones)?
Which of these options did you find to be the most effective in resolving the “message blocking is active” error?
I’d love to see your comments below.
9.Do Perform a full factory reset
A complete factory reset of our gadget would be our last resort.
To do this, go to Settings >> Reset >> Factory Data Reset >> input the information it asks for and perform a full factory reset of your phone to restore it to its default settings.
If you do this, it should work, but I should caution you that it should only be used as a last resort.
10.iMessaging
If you recently switched from an iPhone to an Android smartphone, it’s possible
that your phone number is still recorded as an iMessaging number.
To remedy this issue, contact Apple’s customer service representatives.
How to Disable Message Blocking on iPhone 6, 7, 8, XR, and 12
We’ll go over some quick remedies in this section of the article to help you turn off message blocking on your iPhone.
One thing we noticed throughout our tests and fixes is that iPhone users appear to have a few extra items [in addition to the ones we recommend for Android users, so check those as well because we added other things we didn’t put here that could assist] to pay attention to if they encounter the error: Free Msg: Message Blocking is active, thus you won’t be able to send a message.
These could be as easy as changing a parameter in the settings to performing a full software update.
So you’ll want to try the remedies in the order that we listed them, starting with the easiest and working your way up to the most difficult.
You should also restart your phone to ensure that the problem does not recur.
1.Verify that the recipient’s information is correct.
We recommend that you try this first if you have a problem with messaging or emailing, as many of the problems we see are caused by incorrectly entering the recipient’s information.
A text message or email would not be delivered to a recipient if a number or a letter was missing.
As a result, double-check that the phone number or email address is correct.
2.Eject the SIM and Swap it.
Change the SIM cards in your Samsung phone and try messaging with a different SIM card.
If it works, the problem is most likely with the SIM.
Check if your inability to send text messages is SIM-specific.
3.Turn off iMessage.
Turning off iMessage is a fix as well as a technique to isolate the problem.
On your iPhone, you have two texting apps: iMessage and standard texting.
Either one could be the problem, so turn one-off and try messaging with the other; in this case, it will be the iMessage.
To turn iMessage off, go to Settings >> Messages >> Turn iMessage OFF.
After that, try sending a message. If it doesn’t give us the desired result, we’ll move on to the next step.
4.Attempt sending a Text Using iMessage
Because iMessage wasn’t the problem, this procedure will focus on doing a basic troubleshooting operation on the iMessage app and then attempting to send a message using it.
To do so, make sure your phone has a good internet connection (always turn off iMessage if you don’t have an active data plan or internet connection) >> select Messages >> Send & Receive >> tap on the Apple ID >> and select Sign Out >> go to Settings >> select Messages >> Send & Receive >> tap on the Apple ID >> and select Sign Out >> >> Restart your iPhone To use your Apple ID for iMessage, go back to the Settings app, pick Messages, and then tap Use Your Apple ID for iMessage.
5.Examine the Network’s Quality
Because the iMessage app relies on an internet connection, it’s critical to have a strong internet connection on your phone.
Many people will advise you to reset your network settings, but there is no reason to do so if all of your other internet-connected apps are working fine.
Just make sure that other apps, such as Facebook, WhatsApp, Google Chrome, and others, can connect to the internet.
If they can’t, it’s less of a problem with your texting and more of a problem with your phone.
6. Are You Blocked? Or Are They Blocked?
This is self-explanatory, and we highly recommend it when discussing how to switch OFF Message Blocking Is Active on iPhone and Android.
If one of you is blocked, you will see the following error: Free Message: Message Blocking is active, thus you won’t be able to send a message.
7. Install / Update to the most recent iOS version.
You should make sure that your device is running the most recent software.
iPhones, in comparison to Android phones, rely heavily on software updates.
The software updates distinguish the first three iPhones from the latter three iPhones.
It’s possible that our culprit is an older iPhone that isn’t getting fresh OTA (over-the-air) upgrades, or if you haven’t installed an update in a while.
To check for Apple updates, click to Settings >> General >> Software Updates, then complete any available software updates.
8. A complete factory reset of our gadget would be our last resort.
To accomplish this, open the Settings app >> tap General >> press Reset >> tap Erase ALL Content and Settings >> hit Done >> Confirm that you want to delete the information >> To turn off Apple Find My, enter your Phone PIN code and your Apple ID password >> The screen will become black and an Apple logo with a progress bar will show >> you will be grumbling.
When the Apple Find My service is finished, the screen will go black and an Apple logo with a progress bar will show. When the reset is over, you will be welcomed with flashes of “Hello” in several languages.
If you do this, it should work, but I should caution you that it should only be used as a last resort.
How to Disable Message Blocking on Samsung Galaxy S8, S9, S10, S20, A20, J3, J7
If you have a Samsung smartphone, all of the solutions we propose for Android phones apply to you, and here are a few that are specifically designed for Samsung Galaxy phones.
1. On your Samsung Galaxy phone, enable Premium SMS.
A premium SMS function is something you won’t find on other Android phones, and if you want to fix message blocking on Samsung, that’s where you should start.
To do so, follow these steps: select Apps >> click the three dots in the top right corner of your screen >> select Use the Premium Text Message Services >> go to Settings >> select Apps >> click the three dots in the upper right corner of your screen >> select Use the Premium Text Message Services >> Select the APP, and if a dialog about allowances appears, choose Always
Allow.
2. Swap the SIMs after ejecting them.
Change the SIM cards in your Samsung phone and try messaging with a different SIM card. If it works, the problem is most likely with the SIM. Check if your inability to send text messages is SIM-specific.
To Fix Message Blocking Is Active On Samsung, Carry out A Complete Factory Reset.
A complete factory reset of our gadget would be our last resort. To do this, go to Settings >> Reset >> Factory Data Reset >> input the information it asks for and perform a full factory reset of your phone to restore it to its default settings. If you do this, it should work, but I should caution you that it should only be used as a last resort.
The Error ‘Message Blocking Is Active’ Text Messages Issue on Lycamobile
If you’re having trouble with Lycamobile’s message blocking is an active text messages issue, we have a few potential solutions that should help.
If your plans expire and you haven’t recharged, you’ll receive a message blocking is active indication when you send a message on Lycamobile starting in 2019.
1. Visit the Lycamobile website and purchase a package to fix the Message Blocking Is Active Text Messages problem. Many people have reported that this problem has completely vanished after purchasing a package for as little as $19.
2.We recommend shutting down your Wi-Fi to check if messages will begin to send.
Some customers have discovered that turning off Wi-Fi solves the problem and allows them to send messages again.
3. We also suggest using the Lycamobile sim card in a different smartphone.
We’ve discovered that some sim-related issues are device-specific, thus switching the sim to a different device solves the problem.
4. Another option for dealing with the Lycamobile text message problem is to pinpoint the issue.
Sometimes you’ll be able to send from your phone to your email, but not vice versa, in which case we propose heading to Settings >> Networks >> Mobile Networks >> Access Point Name >> Input and save the Lycamobile-recommended settings.
5. Another way to solve this Lycamobile text message issue is to see if your device has the Lycamobile preferred message center settings. Go to Menu >> Messages >> Message Settings >> Sending Profiles >> Messages >> Messages >> Messages >> Messages >> Messages >> Messages >> To see if the figures match the most recent Lycamobile message center, tap the first profile.
Call 1-845-301-1612 to acquire the Lycamobile message center number.
How to Disable Message Blocking is Active on Metro Pcs
When Message Blocking is Enabled on Metro PCs, what are the possible ways to turn it off?
1.One of the most common and obvious causes of the Message Blocking is Active on Metro Pcs problem is that your plan doesn’t enable you to use the feature you want.
In most cases, if your plan doesn’t allow international calls from the United States, Canada, the United Kingdom, or Australia, a simple upgrade or subscription will solve the problem.
2. The second thing to look for is a problem with the SIM card.
Try swapping devices to check if the sim works on the other one. If it does, you should investigate further to determine what is wrong.
You could also perform a network reset if your message settings or network are malfunctioning.
3.You can also contact Metro Pcs to get your smartphone’s and sim card’s message features updated. A large number of clients have discovered that this solves their problems.
4.You should also think about the recipient. If the recipient’s phone bill isn’t paid, you can notice message blocking on Metro PCs.
Leave a Reply Cancel reply